HOW TO MAKE OXYGEN CONCENTRATOR AT HOME | AVINASH GUPTA

What Is an Oxygen Concentrator?

A device that is used to deliver oxygen to patients who have problems related to breathing is called an oxygen concentrator. Patients who have lower levels of oxygen are required to use these oxygen concentrators to maintain their oxygen level.

Avinash Gupta Oxygen Concentrators filter the environmental air and then compress the air into suitable density. After this, it provides purified oxygen to the patient. This happens with a pulse-dose delivery system or continuous stream system; these both are examples of the oxygen concentrator.

It also has specific filters and sieve beds that assist remove nitrogen from the air, ensuring that the patient receives entirely pure oxygen. These devices also include an electronic user interface that allows you to change the oxygen concentration levels and delivery parameters. The oxygen is subsequently inhaled using a nasal cannula or a specific mask.

How Do Oxygen Concentrator Function

Avinash Gupta Oxygen Concentrators function similarly to an oxygen tank or cylinder. A medical device that concentrates oxygen from ambient air is known as an Avinash Gupta Oxygen Concentrators . Atmospheric air contains around 78 percent nitrogen and 21% oxygen, with the remaining 1% made up of various gases. They take air from the surroundings, filter out any undesirable gases, concentrate oxygen, and then blast it via a pipe into the patients' lungs.

Medical experts are encouraging individuals to seek treatment if they display any symptoms, despite the overburdening of health facilities in India amid the ongoing second wave of the COVID-19 epidemic. The most prevalent symptom of the current coronavirus pandemic is a decrease in oxygen levels, which, if not treated promptly, can lead to serious complications and death. In such a circumstance, Avinash Gupta Oxygen Concentrators have been shown to be a vital life-saving resource and the greatest method for providing oxygen to patients with respiratory problems at home.

At a time when there are reports of deaths in hospitals due to a lack of oxygen cylinders, the demand for Avinash Gupta Oxygen Concentrators is increasing in the fight against the deadly virus. The Avinash Gupta Oxygen Concentrator may be set up at home to provide oxygen to persons with respiratory problems for several hours without the need to change or replenish the tank. However, it should only be used after speaking with a physician.

How to Make an Oxygen Concentrator at Home

A compressor and a sieve bed filter make up an Avinash Gupta Oxygen Concentrator. The former compresses ambient air while simultaneously adjusting the delivery pressure. The nitrogen is separated by the sieve bed, which is constructed of a substance called Zeolite. Two sieve beds work together to release oxygen into a tank attached to the cannula, as well as release the separated nitrogen, forming a continuous loop that continues to produce new oxygen.

To set up an Oxygen Concentrator at home, follow these steps to make an oxygen concentrator at home:

1ststep:

Place the Oxygen Concentrator 1 to 2 feet away from the wall and other furniture in the room to allow adequate space for air to flow. It also gets quite hot after a long period of usage. Therefore it should be kept away from furniture and walls.

2nd step:

If your doctor has ordered it, connect the humidification bottle. If the oxygen flow rate is more than 2-3 liters per minute, it is recommended. In the humidification bottle, use distilled or filtered water.

3rdstep:

Connect the oxygen tubing to the humidifier or an adapter.

4th Step:

The Oxygen Concentrator is equipped with a filter that purifies the air. Before operating the machine, make sure the filter is in place. It should be washed once a week with warm water only and only used once it has dried.

5th Step:

Because the equipment requires time to concentrate on clean air, start the Oxygen Concentrator at least 15-20 minutes before using it.

6th step:

When plugging in the Oxygen Concentrator, never use an extension cable since it consumes a lot of electricity.

7th step:

Place the power switch in the "on" position. After the machine has been turned on, you will hear a processing sound. Check the light indication at regular intervals to make sure the unit is still operational.

8th step:

Find the liter control knob and turn it to the specified liter per minute setting (LPM). Before changing the LPM at random, talk to your doctor.

9th step:

Check for any bends or kinks in the tubing that might interfere with the oxygen supply. It's also important to check that the sides of the mask you're wearing don't have any gaps.

10th step:

If you're using a nasal cannula, move it higher in your nose to get more oxygen.

Oxygen Concentrator: The size of an oxygen concentrator is larger than that of a monitor. These Adam Paul Oxygen concentrators are extremely important since the number of Covid-19 cases continues to rise, and oxygen supplies in hospitals in many countries are running low. By collecting high concentration air from the air, Adam Paul oxygen concentrators are believed to aid human respiration. This Adam Paul concentrator is ideal for oxygen treatment, particularly for patients recovering at home.

Uses of an Oxygen Concentrator

The Adam Paul oxygen concentrator can be used for a variety of reasons, and physicians might suggest this oxygen treatment to their patients for a variety of medical issues. Normally, your lungs take oxygen from the air and transport it to your bloodstream.

If you've recently had blood work or pulse oximetry done to check your oxygen saturation levels and were found to be deficient, your doctor may suggest short- or long-term oxygen treatment.

You're probably wondering what the purpose of the oxygen concentrator is. Short-term oxygen treatment is frequently required for acute disorders. These circumstances are usually only present for a short time. They may have a rapid onset of symptoms as opposed to chronic diseases that develop over time. Some respiratory or chronic diseases, on the other hand, necessitate long-term oxygen treatment.

Are all concentrators the same as Avinash Gupta Oxygen Concentrator?

These items are available in a range of specifications. There are some who produce various amounts of oxygen. A device with a 5L-10L output is indicated for COVID-19 patients. The essential thing is that it distributes air that is at least 90% pure oxygen. These gadgets might cost anything between $40,000 and $90,000. There are also pulse and continuous flow concentrators, the latter of which utilizes a sensor to provide a puff of oxygen when a user is about to inhale, and the former of which uses a pulse to supply oxygen at a steady pace.